...your accessories from this menu.

Page 6 [Prev] [Next]

EAGLE - CAST ALUMINUM

In order to get a better idea as to the size of the eagle, dimensions on eagles offered by Heritage Flag are measured both as the distance from wing-tip to wing-tip and, more importantly, an approximate measurement from the tip of one wing, down the length of the wing, over the body, and up the length of the other wing. This will be referred to as Overall Wing Span. Since the wings are cast in various forms of an in-flight configuration, true wing span would actually be larger. Attachment rod size is 1/2"-13NC.
 
WingTip to WingTip WingSpan Each 4+ 7+ 18+
Gold Tone
EAG0100 6" 8" 33.00 31.50 30.00 29.00
EAG0200 7" 11" 38.50 36.50 34.50 33.00
EAG0300 9" 12" 52.00 49.50 47.00 45.00
EAG0450 9" 15" 65.00 62.00 59.00 57.00
EAG0460 9" on 3" ball 15" 76.00 72.00 68.50 66.00
EAG0550 15" 27" 103.50 98.00 93.00 89.50
EAG0560 15" on 3" ball 27" 114.50 109.00 103.50 100.00
Natural Colors
WingTip to WingTip WingSpan Each 4+ 7+ 18+
EAG0453 15"   86.00 82.00 79.00 76.00
EAG0463 9" on 3" ball 15" 98.00 93.00 89.50 86.00
EAG0553 15" 27" 140.00 133.00 128.00 123.00
EAG0563 15" on 3" ball 27" 150.00 142.50 137.00 132.00

LARGE EAGLE - 44" OVERALL WINGSPAN

Cast Aluminum with GoldTone powderpaint finish With larger proportions, this eagle is especially suited for flagpoles from 40' through 80'. The distance from wing tip to wing tip is approximately 33 inches and the total wing span is approximately 44 inches. The eagle can be used without a ball for application on the large internal or external halyard Ball/Trucks listed in this brochure or with a 8", 10", or 12" ball on heavy duty external halyard truck assemblies. Due to the overall size, this eagle has a 1/4"-10NC stainless steel mounting rod and can only be used on heavy duty, sealed bearing external trucks and the 12" External and Internal Ball/Truck assemblies. Stainless steel spindles must be used for strength. The following prices are for the Eagle or Eagle and Ball only. For external halyard application, refer to price list pages for the truck and stainless steel truck spindle upgrade. Contact Customer Service for required modifications and pricing for adaptation of the Eagle on large Ball/Truck assemblies.
 
EAG0650 Eagle only 625.00
EAG0660 Eagle on 8" spun ball 690.00
EAG0670 Eagle on 10" spun ball 720.00
EAG0680 Eagle on 12" spun ball 735.00
 
These and all other products offered by Heritage Flag & Supply should be recognized as component parts only and therefore the design and engineering of the application of these products is the responsibility of the customer. Warranty information is shown on the back cover of the price list. For further assistance, contact Customer Service at 888-252-5910.

Page 6