As the standard of the industry, Concord's Continental external halyard flagpoles offer a wide range of exposed heights, shaft strength, and standard finishes. Exposed heights range from 20' to 80'. All 30' and 35' shafts are offered in wither a once piece or two piece configuration to minimize shipping costs. Multiple piece shaft sets are pre-fitted at the factory and use a self-aligning internal sleeve.

All Concord Continental shafts made from seamless 6063-T6 high strength aluminum and are designed to meet the most exacting architecture standards. Many shafts are available with a heavy cast aluminum shoe base mount for surface mounting applications. Many shafts are available with a heavy duty wall thickness for special applications.

Standard fittings for the Continental line include a revolving cast aluminum single halyard truck; a limited stretch braided polypropylene halyard; nickel plated snaphooks; 9" cast aluminum cleat; heavy gauge spun aluminum flash collar and a gold anodized, aluminum finial ball. Flagpoles with a 10" or 12" butt diameter are fitted with a heavy duty, sealed bearing revolving truck and stainless steel snaphooks. The ground set foundation sleeve is made of hot-dipped galvanized corrugated steel with self-centering wedges and an integrated grounding rod.

Many optional fittings are available to customize the Continental Flagpole. See
Accessories for optional fittings. 

The standard shaft finish is a deep luster polished finish. Other architectural finishes are available to include, clear anodized, duranodic bronze or black, or powder coat paint finishes.